Running QualityMonitor from the Command Line
AdminStudio 2025 | 29.0 | QualityMonitor
QualityMonitor is included with AdminStudio Professional and Enterprise Editions.
QualityMonitor can be run from the command line by using isqm.exe. It can accept the following parameters:
| Syntax | Options | Description |
|---|---|---|
| -c <MSI Product Code> | Launch QualityMonitor by opening the MSI product specified by the product code. For example: isqm.exe -c {BDC62375-07B4-4CBD-9991-4C25C24F3071} isqm.exe -c {BDC62375-07B4-4CBD-9991-4C25C24F3071} -sb -f <c:\projectfile.iqm> | |
| -sn | Run QualityMonitor silently without any user interaction and no progress display. | |
| -sb | Run QualityMonitor silently with a progress display. QualityMonitor displays the test names as they are executed and provides an option for the user to cancel. | |
| -r <Report File> | Generates a report file <c:\\report\.htm> with the test results. Works only when using either `‑sn` or `‑sb`. | |
| -f <Project File> | Save test results in this file. This is necessary when using either `‑sn` or `‑sb`. If this file does not exist, it will be created and then results will be saved. | |
| -f <Project File> | Launch QualityMonitor with this Project File. For example: isqm.exe -f c:\mydocuments\mytesting\tesresults.iqm isqm.exe -f c:\mydocuments\mytesting\tesresults.iqm -sn | |
| -sn | Run QualityMonitor silently without any user interaction and no progress display. | |
| -sb | Run QualityMonitor silently with a progress display. QualityMonitor displays the test names as they are executed and provides an option for the user to cancel. | |
| -r <Report File> | Generates a report file <c:\\report\.htm> with the test results. Works only when using either ‑sn or ‑sb . | |
| -h or -? | Help |
note
When using any -sn or -sb command line options, you can specify the target product using the existing options /c or /f.
- If you use the /f option to specify the product, the input file will be modified with the test results.
- If you use /c to specify the target product, /f options must be used to specify the project file path which will have the test results.
- If both /c and /f parameters are specified, then QualityMonitor gives preference to /c and operates with the product code specified by /c.